/****************************************************************************
 Module
     ES_Configure.h
 Description
     This file contains macro definitions that are edited by the user to
     adapt the Events and Services framework to a particular application.
*****************************************************************************/

#ifndef ES_CONFIGURE_H
#define ES_CONFIGURE_H

/****************************************************************************/
// The maximum number of services sets an upper bound on the number of
// services that the framework will handle. Reasonable values are 8 and 16
// corresponding to an 8-bit(uint8_t) and 16-bit(uint16_t) Ready variable size
#define MAX_NUM_SERVICES 16

/****************************************************************************/
// This macro determines that nuber of services that are *actually* used in
// a particular application. It will vary in value from 1 to MAX_NUM_SERVICES
#define NUM_SERVICES 8

/****************************************************************************/
// These are the definitions for Service 0, the lowest priority service.
// Every Events and Services application must have a Service 0. Further
// services are added in numeric sequence (1,2,3,...) with increasing
// priorities
// the header file with the public function prototypes
#define SERV_0_HEADER "KeyMapper.h"
// the name of the Init function
#define SERV_0_INIT InitKeyMapper
// the name of the run function
#define SERV_0_RUN RunKeyMapper
// How big should this services Queue be?
#define SERV_0_QUEUE_SIZE 5

/****************************************************************************/
// The following sections are used to define the parameters for each of the
// services. You only need to fill out as many as the number of services
// defined by NUM_SERVICES
/****************************************************************************/
// These are the definitions for Service 1
#if NUM_SERVICES > 1
// the header file with the public function prototypes
#define SERV_1_HEADER "TOT.h"
// the name of the Init function
#define SERV_1_INIT InitTOT
// the name of the run function
#define SERV_1_RUN RunTOT
// How big should this services Queue be?
#define SERV_1_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 2
#if NUM_SERVICES > 2
// the header file with the public function prototypes
#define SERV_2_HEADER "Servo.h"
// the name of the Init function
#define SERV_2_INIT InitServo
// the name of the run function
#define SERV_2_RUN RunServo
// How big should this services Queue be?
#define SERV_2_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 3
#if NUM_SERVICES > 3
// the header file with the public function prototypes
#define SERV_3_HEADER "Motor.h"
// the name of the Init function
#define SERV_3_INIT InitMotor
// the name of the run function
#define SERV_3_RUN RunMotor
// How big should this services Queue be?
#define SERV_3_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 4
#if NUM_SERVICES > 4
// the header file with the public function prototypes
#define SERV_4_HEADER "Spinner.h"
// the name of the Init function
#define SERV_4_INIT InitSpinner
// the name of the run function
#define SERV_4_RUN RunSpinner
// How big should this services Queue be?
#define SERV_4_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 5
#if NUM_SERVICES > 5
// the header file with the public function prototypes
#define SERV_5_HEADER "Game.h"
// the name of the Init function
#define SERV_5_INIT InitGame
// the name of the run function
#define SERV_5_RUN RunGame
// How big should this services Queue be?
#define SERV_5_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 6
#if NUM_SERVICES > 6
// the header file with the public function prototypes
#define SERV_6_HEADER "PingPong.h"
// the name of the Init function
#define SERV_6_INIT InitPingPong
// the name of the run function
#define SERV_6_RUN RunPingPong
// How big should this services Queue be?
#define SERV_6_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 7
#if NUM_SERVICES > 7
// the header file with the public function prototypes
#define SERV_7_HEADER "Blower.h"
// the name of the Init function
#define SERV_7_INIT InitBlower
// the name of the run function
#define SERV_7_RUN RunBlower
// How big should this services Queue be?
#define SERV_7_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 8
#if NUM_SERVICES > 8
// the header file with the public function prototypes
#define SERV_8_HEADER "TestHarnessService8.h"
// the name of the Init function
#define SERV_8_INIT InitTestHarnessService8
// the name of the run function
#define SERV_8_RUN RunTestHarnessService8
// How big should this services Queue be?
#define SERV_8_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 9
#if NUM_SERVICES > 9
// the header file with the public function prototypes
#define SERV_9_HEADER "TestHarnessService9.h"
// the name of the Init function
#define SERV_9_INIT InitTestHarnessService9
// the name of the run function
#define SERV_9_RUN RunTestHarnessService9
// How big should this services Queue be?
#define SERV_9_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 10
#if NUM_SERVICES > 10
// the header file with the public function prototypes
#define SERV_10_HEADER "TestHarnessService10.h"
// the name of the Init function
#define SERV_10_INIT InitTestHarnessService10
// the name of the run function
#define SERV_10_RUN RunTestHarnessService10
// How big should this services Queue be?
#define SERV_10_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 11
#if NUM_SERVICES > 11
// the header file with the public function prototypes
#define SERV_11_HEADER "TestHarnessService11.h"
// the name of the Init function
#define SERV_11_INIT InitTestHarnessService11
// the name of the run function
#define SERV_11_RUN RunTestHarnessService11
// How big should this services Queue be?
#define SERV_11_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 12
#if NUM_SERVICES > 12
// the header file with the public function prototypes
#define SERV_12_HEADER "TestHarnessService12.h"
// the name of the Init function
#define SERV_12_INIT InitTestHarnessService12
// the name of the run function
#define SERV_12_RUN RunTestHarnessService12
// How big should this services Queue be?
#define SERV_12_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 13
#if NUM_SERVICES > 13
// the header file with the public function prototypes
#define SERV_13_HEADER "TestHarnessService13.h"
// the name of the Init function
#define SERV_13_INIT InitTestHarnessService13
// the name of the run function
#define SERV_13_RUN RunTestHarnessService13
// How big should this services Queue be?
#define SERV_13_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 14
#if NUM_SERVICES > 14
// the header file with the public function prototypes
#define SERV_14_HEADER "TestHarnessService14.h"
// the name of the Init function
#define SERV_14_INIT InitTestHarnessService14
// the name of the run function
#define SERV_14_RUN RunTestHarnessService14
// How big should this services Queue be?
#define SERV_14_QUEUE_SIZE 3
#endif

/****************************************************************************/
// These are the definitions for Service 15
#if NUM_SERVICES > 15
// the header file with the public function prototypes
#define SERV_15_HEADER "TestHarnessService15.h"
// the name of the Init function
#define SERV_15_INIT InitTestHarnessService15
// the name of the run function
#define SERV_15_RUN RunTestHarnessService15
// How big should this services Queue be?
#define SERV_15_QUEUE_SIZE 3
#endif

/****************************************************************************/
// Name/define the events of interest
// Universal events occupy the lowest entries, followed by user-defined events
typedef enum
{
	ES_NO_EVENT = 0,
	ES_ERROR,                 /* used to indicate an error from the service */
	ES_INIT,                  /* used to transition from initial pseudo-state */
	ES_TIMEOUT,               /* signals that the timer has expired */
	ES_SHORT_TIMEOUT,         /* signals that a short timer has expired */
	/* User-defined events start here */
	ES_NEW_KEY,               /* signals a new key received from terminal */
	// TOT
	GAME_COMPLETED,
	TOT_DETECTED,
	TOT_REMOVED,
	RESET,
	// Motor
	SPINNER_START,
	SPINNER_STOP,
	// Spinner
	START_POTATO,
	END_POTATO,
	PULSE_DETECTED,
	// Blower
	PP_COMPLETED,
	BLOWING_START,
	BLOWING_STOP,
	// Game
	POS_MIDDLE,
	POS_TOP,
	// PingPong
	FALLING_MIDDLE,
	FALLING_TOP,
	RISING_MIDDLE,
	RISING_TOP
}ES_EventType_t;

/****************************************************************************/
// These are the definitions for the Distribution lists. Each definition
// should be a comma separated list of post functions to indicate which
// services are on that distribution list.
#define NUM_DIST_LISTS 0
#if NUM_DIST_LISTS > 0
#define DIST_LIST0 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 1
#define DIST_LIST1 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 2
#define DIST_LIST2 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 3
#define DIST_LIST3 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 4
#define DIST_LIST4 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 5
#define DIST_LIST5 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 6
#define DIST_LIST6 PostTemplateFSM
#endif
#if NUM_DIST_LISTS > 7
#define DIST_LIST7 PostTemplateFSM
#endif

/****************************************************************************/
// This is the list of event checking functions
#define EVENT_CHECK_LIST Check4Keystroke, CheckTOTEvents, CheckSpinnerEvents, CheckPingPongEvents, CheckBlowerEvents

/****************************************************************************/
// These are the definitions for the post functions to be executed when the
// corresponding timer expires. All 16 must be defined. If you are not using
// a timer, then you should use TIMER_UNUSED
// Unlike services, any combination of timers may be used and there is no
// priority in servicing them
#define TIMER_UNUSED ((pPostFunc)0)
#define TIMER0_RESP_FUNC TIMER_UNUSED
#define TIMER1_RESP_FUNC PostTOT
#define TIMER2_RESP_FUNC PostServo
#define TIMER3_RESP_FUNC TIMER_UNUSED
#define TIMER4_RESP_FUNC PostMotor
#define TIMER5_RESP_FUNC PostSpinner
#define TIMER6_RESP_FUNC PostBlower
#define TIMER7_RESP_FUNC PostBlower
#define TIMER8_RESP_FUNC PostGame
#define TIMER9_RESP_FUNC PostPingPong
#define TIMER10_RESP_FUNC ES_PostAll
#define TIMER11_RESP_FUNC PostTOT
#define TIMER12_RESP_FUNC ES_PostAll
#define TIMER13_RESP_FUNC PostPingPong 
#define TIMER14_RESP_FUNC PostTOT 
#define TIMER15_RESP_FUNC TIMER_UNUSED

/****************************************************************************/
// Give the timer numbers symbolc names to make it easier to move them
// to different timers if the need arises. Keep these definitions close to the
// definitions for the response functions to make it easier to check that
// the timer number matches where the timer event will be routed
// These symbolic names should be changed to be relevant to your application

#define TOT_TIMER 			1
#define SERVO_TIMER 		2
#define MOTOR_TIMER			4
#define SPINNER_TIMER		5
#define BLOWING_LED_TIMER 	6
#define BLOWING_TIMER 		7
#define GAME_TIMER 			8
#define PINGPONG_TIMER 		9
#define AUDIO_TIMER 		10
#define IDLE_TIMER 			11
#define WELCOME_TIMER		12
#define HACKY_TIMER 		13
#define SERVO_RESET_TIMER 	14

/**************************************************************************/
// uncomment this ine to get some basic framework operation debugging on
// PF1 & PF2
//#define _INCLUDE_BASIC_FRAMEWORK_DEBUG_

#ifndef _INCLUDE_BASIC_FRAMEWORK_DEBUG_
/**************************************************************************/
// uncomment the next line to get byte-wide debugging on the '595
// uses PF1, PF2 & PF3 
#define _INCLUDE_BYTE_DEBUG_

#endif /* _INCLUDE_BASIC_FRAMEWORK_DEBUG_ */

#endif /* ES_CONFIGURE_H */